Type Approval Services

RFID Type Approval Guide

In the end of 2008 I already informed you about the Bluetooth type approval guide. Now I’m going to inform you how to get type approval certificate for RFID equipment or let say the RFID Type Approval Guide in Indonesia. Make sure that your equipment is match with the Indonesian Regulatory authority in RFID Categories. Please study the specifications below to help my team work for obtaining in type approval certificate and get approved in Indonesia

Applicable Standars in Indonesia

RFID approval test will be based on national standard: KEPDIRJEN No.214/DIRJEN/2005 for RFID operation in 13.56 MHz, with the key parameters are as follows:

  • Radiated Emission Limits

KPDIRJEN No 214/DIRJEN/2005 for RFID

  • Error Frequency shall be below 50 KHz
  • The Transmission power shall be below 10mW (ERP)

Another kind of RFID approval test will be based on national standar: KEPDIRJEN No.221/DIRJEN/2007 for RFID Operated in 923 – 925 MHz, with the key parameters as follows:

  • Radiated Emmision Limits

KEPDIRJEN No 221/DIRJEN/2007 for RFID

  • Tag utilized shall be passive tags
  • Total bandwidth utilization shall be 2 MHz with maximum hopping channel 500 KHz
  • The transmission power shall be below 2000mW (ERP)
  • Modulation technique: Frequency Hopping Spred Spectrum (FHSS)
  • Transmitter antenna shall be embedded with +/- 6 dBi, 5 Omega
  • Error Frequency: +/-20 ppm from center frequency
  • Communication ports:UART, RS-232, RS-485, USB, Serial, Parallel, LAN, WLAN, WAN
  • Receiver Sensitivity: max 28dBµV/m or -96dBm, with impedance input 50 Omega

Finally if you are going to use my / our services for obtaining in type approval Indonesia, please prepare these certain documents

  1. Copy of agency, sole agent or distributor agreement from manufacturer (For sole agent or distributor only)
  2. Power of Attorney [ POA Form ]
  3. Form PM.4 [ PM.4 and PM.5 Forms ]
  4. Form PM.5
  5. Technical specification
  6. Operational manual
  7. Foreign test report (optional)
  8. Required 2 units sample.

For sure please look at my other posting about the document requirements.

Related Post:

7 Responses to “RFID Type Approval Guide”

  1. kami selalu dukung terus..Boss…

  2. Rita says:

    My english not good mas, gak pede hehe so kukomen make bahasa aja yaa :D
    Ow gitu yaa, ternyata ada standardisasina yaa, baru taw.Selama ini bisa makenya aja :D

  3. [...] RFID approval test will be based on national standard: KEPDIRJEN No.214/DIRJEN/2005 for RFID operation in 13.56 MHz. for more information feel free to visit the RFID Type Approval Guide [...]

  4. doh gk ngarti maz, salam ngeblog aja

  5. nanee says:

    mf mz,aq gaptek neh….numpang coment aza and lam kenal dech.sukses slalu……..

Leave a Reply

Powered by WordPress | Designed by Elegant Themes